Polaris 2002 ATV Sportsman 6X6 - Manual (Page 117)

114
MAINTENANCE AND LUBRICATION
Lights - Adjustment - Replacement
Taillight/Brakelight Lamp Replacement
If the taillight/brakelight does not
work the lamp may need to be
replaced.
1. Remove the taillight assembly by
removing the two screws securing
it to the vehicle.
2. Twist the lamp harness 1/4 turn to
release the lock. Pull the lamp har-
ness out of the back of the assem-
bly.
3. Remove the lamp from the harness
and replace it with the recom-
mended lamp.
4. Test the taillight/brakelight to see
that it’s working.
5. Replace the lamp harness into the
back of the taillight assembly, twist-
ing 1/4 turn to lock in place.
6. Reinstall the taillight assembly to
the vehicle.
Indicator Lamp Replacement
1. Follow steps 1 - 3 of Headlight
Housing Replacement on pre-
vious page.
2. Unplug light from harness.
3. Using a screwdriver, turn the light
1/4 turn counter clockwise.
4. Install new light and use a screw-
driver to seat it into place, 1/4 turn
clockwise.
5. Reassemble pod.
Taillight Assembly
Lamp
Lamp
Harness
Lens