Elmo Visual Presenter HV-7100SX - Manual (Page 32)

Focus
Adjust the focus of the object.
■ Auto Focus
Press the auto focus button [AF] on the front panel or
the wireless remote control, to activate the auto focus.
While the auto-focus is in operation, the indicator
lamp on the front panel blinks until the object is
brought into focus.
This product features a one-push auto focus function.
Once focusing is completed, the auto focus function is
released, and the focused position maintains
unchanged (FOCUSFREE).
The objects listed below may not be brought into
focus in the auto focus mode. In these cases, use
the manual focus mode.
• Objects bearing little contrast
• Objects with fine repeated patterns, such as
lateral stripes and cross stripes
• Objects glittering or reflecting strong light
• Objects with bright background, or excessive
contrast
• The whole image is dark.
• Objects located near and far at the same time
• Objects in motion
The auto focus function will be canceled if the manual
focus button [FOCUS.NEAR] or [FOCUS.FAR] on
the wireless remote control is pressed.
The auto focus function works up to a height of
approx. 10cm (3.9 in) above the stage surface
w h e n t h e z o o m b u t t o n [ T E L E ] i s s e t t o t h e
maximum.
PAUSE
2x
SET PRESET
LIVE
MEMORY
CALL SET IMAGE CALL
LAMP POSI/NEGA COLOR/B&W UPPER BASE
IRIS
AF NORMAL OPEN CLOSE
TELE ZOOM WIDE NEAR FOCUS FAR
RGB1 RGB2 MAIN MONITOR OUTPUT
MONITOR OUTPUT PAUSE
F.A.M.
MAIN
RGB1
RGB2
IRIS OPEN CLOSE
ZOOM
TELE
WIDE POSI / NEGA IMAGE ROTATION
AUTO/MANUAL
CONTRAST
WHITE
BALANCE
LAMP
UPPER / BASE / OFF
AF
ZOOM
TELE
WIDE ONTRAST
WHITE
BALANCE
AF
IRIS
AF
NORMAL OPEN CLOSE
TELE ZOOM WIDE NEAR FOCUS FAR
1
2
3
4
5
6
7
8
9
10
11
31
Front operation panel Wireless remote control
Front operation panel
Wireless remote control