Rear panel – Elmo Visual Presenter HV-7100SX User Manual
Page 11
Rear Panel
10
1
2
3
4
5
6
7
8
9
10
11
Power Cord
Receptacle
[AC IN]
1
12VDC Out
Terminal
[DC12V]
2
RS-232C
Terminal
[RS-232C]
3
Analog RGB-out
Terminal
[OUTPUT.RGB OUT]
5
Analog RGB-in
Terminal 1
[INPUT.RGB1]
6
Mouse
Terminal
[MOUSE]
7
USB
Terminal
[USB]
8
Vide-out Terminal
[OUTPUT.S-VIDEO
/VIDEO]
S-Video (mini DIN 4P),
Composite video (RCA pinjack)
9
Analog RGB-in
Terminal 2
[INPUT.RGB2]
10
DIP
Switch
12
Stereo
Audio
Input
Terminal
1/2
11
Stereo
Audio
Output
Terminal
4
Name
Function
Reference Page
Analog RGB-in
Terminal
1
[INPUT.RGB1]
Mouse Terminal [MOUSE]
USB Terminal [USB]
Video-out Terminal
[OUTPUT.S-VIDEO/VIDEO]
S-Video (mini DIN 4P)
Composite video
(RCA pinjack)
Power Cord Receptacle [AC IN]
RS-232C Terminal
[RS-232C]
Analog RGB-out
Terminal
[OUTPUT.RGB OUT]
12VDC Out Terminal
[DC12V]
1
2
3
6
7
8
9
5
Connected to the power cord connector.
To connect the mouse (supplied accessory).
If connected to PC with the attached USB
cable, it is possible to transfer images
and control the main unit by using the
software in the attached Utility Software
CD-ROM.
To output images to the NTSC/PAL
monitor, such as TV monitor.
Image is output when this terminal is
connected to RGB input equipment
(e.g., LCD projector, multi-sync monitor).
Input image is output through analog
RGB-out terminal and video-out terminal
when the input selection is set at RGB1.
P.36
P.46
P.16
P.22
P.14
P.36
P.15
P.16
To output DC12V and the image. This
connecting terminal specially designed
for the LCD monitor (LM-5011N)
available separately.
Do not connect the equipment other
than
LM-5011N.
To connect the RS-232C cable when
controlling the main unit from the PC.
Stereo Audio Output
Terminal
4
To output sound to audio input equipment.
P.22