Grass Valley Turbo iDDR Quick Start - Manual (Page 2)

2 Turbo Quick Start Guide 06 July 2005
Safety Summary Use Proper Power Cord – To avoid fire hazard, use only the power cord specified for this
product.
Ground the Product – This product is grounded through the grounding conductor of the power
cord. To avoid electric shock, the grounding conductor must be connected to earth ground.
Before making connections to the input or output terminals of the product, ensure that the
product is properly grounded.
Do Not Operate Without Covers – To avoid electric shock or fire hazard, do not operate this
product with covers or panels removed.
Do Not Operate in Wet/Damp Conditions – To avoid electric shock, do not operate this
product in wet or damp conditions.
Do Not Operate in an Explosive Atmosphere – To avoid injury or fire hazard, do not operate
this product in an explosive atmosphere.
Avoid Exposed Circuitry – To avoid injury, remove jewelry such as rings, watches, and other
metallic objects. Do not touch exposed connections and components when power is present.
Symbols on the
Product The following symbols may appear on the product:
DANGER high voltage
Protective ground (earth) terminal
ATTENTION – refer to manual
Copyright Copyright © 2005 Thomson Broadcast and Media Solutions, Inc. All rights reserved. Printed in
the United States of America. This document may not be copied in whole or in part, or
otherwise reproduced except as specifically permitted under U.S. copyright law, without the
prior written consent of Thomson Broadcast and Media Solutions, Inc., P.O. Box 59900,
Nevada City, California 95959-7900
Trademarks Grass Valley, Turbo, M-Series, Profile, and Profile XP are either registered trademarks or
trademarks of Thomson Broadcast and Media Solutions, Inc. in the United States and/or other
countries. Other trademarks used in this document are either registered trademarks or
trademarks of the manufacturers or vendors of the associated products. Thomson Broadcast
and Media Solutions, Inc. products are covered by U.S. and foreign patents, issued and
pending. Additional information regarding Thomson Broadcast and Media Solutions, Inc.
trademarks and other proprietary rights may be found at www.thomsongrassvalley.com.
Disclaimer Product options and specifications subject to change without notice. The information in this
manual is furnished for informational use only, is subject to change without notice, and should
not be construed as a commitment by Thomson Broadcast and Media Solutions, Inc. Thomson
Broadcast and Media Solutions, Inc. assumes no responsibility or liability for any errors or
inaccuracies that may appear in this publication.
U.S. Government
Restricted Rights
Legend Use, duplication, or disclosure by the United States Government is subject to restrictions as set
forth in subparagraph (c)(1)(ii) of the Rights in Technical Data and Computer Software clause
at DFARS 252.277-7013 or in subparagraph c(1) and (2) of the Commercial Computer
Software Restricted Rights clause at FAR 52.227-19, as applicable. Manufacturer is Thomson
Broadcast and Media Solutions, Inc., P.O. Box 59900, Nevada City, California 95959-7900
U.S.A.
This Product
Incorporates Licensed
Software Use of the software installed on the this product or on the associated media is subject to the
terms of end user license agreements. You should not use the software until you have read the
end user license agreements. By using the software, you signify that you have read the end
user license agreements accessible through the Help | About dialog box and accept their terms.
Revision Status
!
Rev Date Description
03 May 2005 Final Draft of the Turbo Quick Start Guide — 071-8379-00
06 July 2005 Removed software version number — 071-8379-01