Grass Valley Profile Analog Composite Monitor - Manual (Page 37)

Installation Verification
Analog Composite Monitor Installation 37
Installation Verification
Verification of installation of the Analog Composite Monitor board consists of
ensuring that the system recognizes the board. Use the Diagnostics window, which
lists all installed and recognized boards, to see if the system recognizes the board.
To check for Analog Composite Monitor board recognition:
1. Open the Diagnostics window by selecting PDR Debug Tools | PDR
Diagnostics .
2. On the left side of the window, ensure that AnaCompMon appears at
Slot J12 (see Figure 10 for an example).
.
Figure 10. Diagnostics Window Board Recognition Example
Slot J1
Slot J2
Slot J3
Slot J4
Slot J5
Slot J6
Slot J7
Slot J8
Slot J9
Slot J10
Slot J11
Slot J12
Slot J13
Slot J14
Slot J15
Slot J16
Slot J17
Mother Bd
Pentium CPU
Quit
Mother Board (Rev 0)
RS422, if installed
Ref Gen (4 LTC) (Rev 0)
Serial UA (Rev 1)
Non-EISA slot
SMCA010
Serial UA (Rev 1)
ASPB (Rev 1)
Master EDR (Rev 0)
Slave EDR (Rev 0)
BUS4202
Fibrechannel I/F (Rev 0)
Mix Effects (Rev 0)
AnaCompMon (Rev 1)