Grass Valley MPEG Upgrade - Manual (Page 39)

Installation Verification
MPEG Board Upgrade Installation 29
Figure 10. Stick-on label location
Installation Verification
Verification for installation of the MPEG board consists of:
• Checking the Profile Log for messages about the presence of MPEG boards.
On the Windows NT 4.0 desktop, double-click the Profile Log icon or choose
Start | Programs | PDR Applications | Profile Log .
• Using Configuration Manager to see if the system recognizes the newly
installed boards. For instructions, see “Using Configuration Manager to
Verify Boards” on page 30.
• Using VdrPanel to verify that you can configure MPEG video and audio
resources, and then record and play on all available channels. This will help
detect any problems with the MPEG boards for video and/or Sharcnet
cabling for audio. For information on configuring VdrPanel, as well as
recording and playing clips, see the chapter on VdrPanel in the Profile
Family User Manual.
• Using Media Manager to convert media with the Transcode Utility and to
perform media transfers over Fibre Channel, if a Fibre Channel board is
installed. For information on the Transcode Utility and copying or moving
media over Fibre Channel, see the chapter on Media Manager in the Profile
Family User Manual.
9676-26
Labels