Grass Valley MPEG Upgrade - Manual (Page 14)

MPEG Board Upgrade Installation
4 MPEG Board Upgrade Installation
Kit Contents
This upgrade kit includes the following:
• An MPEG board.
• A five-slotted PCI Interconnect board.
• Sharcnet cables for digital embedded audio.
• Five antistatic bags for board storage.
• Replacement tie wraps for bundling cables.
• A set of stick-on identification labels.
• This installation manual.
Tools Required
Tools required to install the board are (not supplied in this kit):
• A Torx tool with T10 and T15 tips.
• Electrostatic discharge (ESD) wrist grounding straps.
Electrostatic Precautions
CAUTION: All Profile system circuit boards have components that are highly
sensitive to electrostatic discharge (ESD). To protect these components from
damage and to maintain product reliability, take the following precautions
when handling the circuit board:
• Handle all circuit boards in a static-protected area capable of controlling
static charge on conductive materials, people, and nonconductive
materials. Static-protected areas include nonstatic table tops and nonstatic
floor mats.
• While out of the chassis, place boards in the ESD static-shielded bags
(provided with this kit) until you install them.
• Wear ESD grounding straps when handling boards outside of their ESD
static-shielded bags.
• Handle the circuit boards only by the edges and avoid touching the printed
wires on the back of the circuit board as much as possible.
!!