Replacing the profile covers, Profile cover replacements – Grass Valley Profile Mix Effects Upgrad 100 Fibre Channel User Manual

Page 70

PDR 100 Fibre Channel Installation

Replacing the Profile Covers

See Figure 30 and replace covers as follows:

1. Set board area cover

in place and use the Torx tool with the T10 bit to

replace the twelve cover screws; eight on top and four from the side.

2. Set disk drive cover

in place and use the Torx tool with the T10 and T15

tips to replace the cover with the screws previously removed.

NOTE: Your PDR 100 may have more disk drive cover screws than shown in
Figure 30.

Figure 30. Profile Cover Replacements

9674-12