Grass Valley Profile Mix Effects Upgrad 100 Fibre Channel - Manual (Page 63)

Reinstalling Board Retainer Brackets
PDR 100 Fibre Channel Installation 63
2. Use the Torx tool with the T10 bit to replace bracket retaining screw
Ë
.
Figure 23. Board Retainer Bracket installation
To reinstall the full size board retainer bracket refer to Figure 23 and proceed as
follows:
1. Place bracket
Ì
over the boards.
2. Align the full size boards to the correct bracket slots (see insert in Figure 23)
and carefully seat the bracket onto the boards.
9674-14
4
2
1
3