Grass Valley Pegasus - Manual (Page 16)

1
Audio output
The following are specifications of the (4pin-4pin) audio cable:
Red: Right channel (R)
Audio cable (4pin-4pin)
White: Left channel (L)
Black: Ground (G)
For audio output, use the attached (4pin-4pin) audio cable to connect the
sound output device and the mainboard.
Attach the (4pin-4pin audio cable) branched-connector cable with different
connector types and wiring specifications. Connect the single end to
the mainboard and the branched end to the sound output device. Use a
connector that complies with the connector type and wiring specifications
of the destination connection. If you cannot use the attached (4pin-4pin)
audio cable, separately prepare another cable.
Output from an on-board sound device
Connect the audio cable to the terminal on the motherboard.
Note that an onboard sound device (the sound device integrated on
the motherboard: for details, see the instruction manual for your PC
or motherboard) might interfere with the board installed in the slot,
depending on the position of the connector on the device.
Output from the sound board.
Connect audio cables in here:
*
*