Configuration, Summary, Adding a panel to an nv9000 configuration – Grass Valley NV9607 v.1.1 User Manual
Page 25: 4 configuration, Summary adding a panel to an nv9000 configuration, Chapter 4, Topics

15
Configuration
Chapter 4 provides configuration instructions for the NV9607.
Topics
Adding a Panel to an NV9000 Configuration
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
NV9607 Panel Configuration Page
Multi-Destination Configuration
This chapter addresses configurers. Operators and other persons not interested in NV9607
configuration need not read this chapter.
Summary
The NV9607 is a relatively simple panel. It has 116 function buttons and a small display.
Although it has relatively few button functions, there are 4 operating modes.
•
•
•
Single-Destination Mode with Breakaway
•
The set of button functions varies from mode to mode.
NV9000-SE Utilities is the software with which to configure the NV9607. Figure 4-1, following,
shows the default NV9607 panel configuration page from NV9000-SE Utilities.
Adding a Panel to an NV9000 Configuration
You must create configurations for the NV9607 using NV9000-SE Utilities. We assume that you
are familiar enough with NV9000-SE Utilities that you can understand the following material. It
is not difficult material, but some of the concepts might not be familiar to everyone.
It takes only a few seconds to add a new panel configuration.