Dial tone pause – Ericsson 230 User Manual
Page 51
![background image](/manuals/79623/51/background.png)
Not
f
or Comm
e
rc
ia
l Use
E
ricsson Mobile
Com
m
unic
a
ti
ons A
B
50
Personalizing the base station
To set least cost routing:
Route:
BaseStation » Routing
1.
Select
Routing
and press
Y E S
.
PIN:
is displayed.
2.
Enter the PIN code for the base station (see page 58) and press
Y E S
.
Either
Route
(1 - 4) or a number, if a prefix has already been set, is
displayed.
3.
Press the
U P
or
D OW N
key, once or more, to choose a different prefix if
required and press
Y E S
.
4.
Enter the prefix digits (
C L R
= delete;
U P
= move left;
D OW N
= move
right).
5.
Press
Y E S
to confirm.
Substitution digits are displayed if they have been set before.
6.
Enter the substitution digits (
CL R
= delete;
U P
= move left;
D O W N
=
move right).
7.
Press
Y E S
to confirm.
A prefix with associated substitution digits is set.
If you include a pause in a telephone number, there is a pause during dialling
at that point to wait for the dial tone. The base station automatically inserts a
dial tone pause before each telephone number. You can adjust the length of the
pause.
The standard pause is 1 second. You can set this from 1 to 10 seconds:
Route:
BaseStation » Basic » PhoneLine » Pause
1.
Select
Basic
and press
Y E S
.
PIN:
is displayed.
2.
Enter the PIN code for the base station (see page 58) and press
Y E S
.
3.
Select
Pause
and press
Y E S
.
The current pause length is displayed.
4.
Enter a number (1 - 10) to set the length of the pause in seconds.
5.
Press
Y E S
to confirm.
The dial tone pause has now been changed.
To include a pause in a telephone number, press
for one second. A dash
marks the pause. The base station waits for the dial tone for the length of the
dial tone pause.
DIAL TONE PAUSE