Ring volume, Ringing order, Setting the ringing order – Ericsson 230 User Manual
Page 47
![background image](/manuals/79623/47/background.png)
Not
f
or Comm
e
rc
ia
l Use
E
ricsson Mobile
Com
m
unic
a
ti
ons A
B
46
Personalizing the base station
The base station rings when an external call is received. You can adjust the
ring volume.
To adjust the ring volume with the handset:
Route:
BaseStation » RingVolume
1.
Select
RingVolume
and press
Y E S
.
The current ring volume setting is displayed (0 is the quietest level and 6 is
the loudest level.
2.
Press the
U P
or
D OW N
key once, or more, to turn the volume up or down.
You can now also use the
VO L U M E
U P
or
VO L U M E
D OW N
key on the
handset to change the volume. Each time you press
VO L U M E
U P
or
VO L U M E
D OW N
, you hear the ring at the new volume.
3.
Press
Y E S
to confirm.
The base station ring volume level has now been changed.
When the base station receives an external call, all handsets ring. The base sta-
tion is pre-set so that all handsets ring at the same time. However, you can also
set the order in which the handsets ring.
Setting the ringing order
Using a handset, you can program the order in which the handsets ring.
To change the ringing order:
Route:
BaseStation » Basic » RingOrder » Priority
1.
Select
Basic
and press
Y E S
.
PIN:
is displayed.
2.
Enter the PIN code for the base station (see page 58) and press
Y E S
.
3.
Select
Priority
and press
YE S
.
The current ringing order is displayed.
4.
Press
U P
or
D OW N
to select one of the following options:
•
One
means only handset 1.
•
One, Rest
means first handset 1, then all handsets.
•
One, Two..
means first handset 1, then 2, then 3, etc.
•
All
means all the handsets at the same time (default).
5.
Press
Y E S
to confirm.
The ringing order has now been stored.
If the handset that should ring first has been switched off, the next handset
rings instead.
RING VOLUME
RINGING ORDER