Ericsson 230 User Manual
Page 12
![background image](/manuals/79623/12/background.png)
Not
f
or Comm
e
rc
ia
l Use
E
ricsson Mobile
Com
m
unic
a
ti
ons A
B
Getting started
11
3.
Find a suitable location for the base station. To make the best use of its
operating range, put your base station in a central position. You can place
it on a table using the desk stand or mount it on the wall using the wall
mounter.
4.
If you place the base station on a wall, screw the wall mounter to the wall.
5.
Connect the telephone line to the telephone socket in the base station.
6.
Connect the telephone line to the analogue telephone wall socket.
7.
Connect the power cord to the power plug socket in the base station.
8.
Connect the desk stand to the base station or connect the base station to the
wall mounter. Put the lower hooks in first.
For the desk stand, route the cables through the slots at the back.
9.
Put the handset into the base station as shown in the picture. The handset
must be off.
10.
Put the power adaptor plug into the wall socket.
If you see a red, flashing light on the top of the base station, there is a fault
with the telephone line connection.
After a few minutes the handset will subscribe itself to the base station and
turn on automatically.
11.
Leave the handset in the base station for at least 3 hours to charge the bat-
tery for the first time.
Telephone socket identifier
Power plug socket identifier
Home
1