Grass Valley K2 TimeDelay v.9.0 - Manual (Page 17)

7 November 2013 K2 TimeDelay User Manual 17
Using K2 TimeDelay clip in another application
1. Click the Settings button or select Settings menu item from the Menu to
open the TimeDelay Settings dialog box.
2. Select the Buffer page.
3. Check the Start purging after check box and enter a time interval. If the
specified time interval is shorter than the longest playback delay, then
purging does not begin until after the longest playback delay.
4. Click OK to close the TimeDelay Settings dialog box.
Using K2 TimeDelay clip in another application
The clip recorded by K2 TimeDelay can be used in other applications, in a
similar manner to any other clip on the system. For example, you can load it
into the Player application and play it or create subclips from it.
NOTE: When the purge interval is reached, the oldest media is purged. The first
frames will be deleted as the session continues along. For more information on
purging media, see “
Purging media with K2 TimeDelay ,” on page 16.