Grass Valley K2 TimeDelay v.9.0 - Manual (Page 15)

7 November 2013 K2 TimeDelay User Manual 15
Adjusting K2 TimeDelay playback
NOTE: To ensure frame accuracy, Grass Valley recommends using an external
timecode source such as LITC.
To modify the time of day source, do the following:
1. Select System | Configuration .
2. Select the System tab.
3. In the Time Of Day section, select the source.
4. Click OK to close the Configuration dialog box.
Adjusting K2 TimeDelay playback
Use the TimeDelay Settings dialog box to modify the start time either in terms
of delay or give a specific start time. Once you have clicked the
OK button,
TimeDelay adjusts the playback in one of two ways:
• If playback has not started, TimeDelay schedules the playback as usual.
— or —
• If playback has already started, clicking the OK button causes TimeDelay to
stop the playback on that channel, cue to the new delay offset, and begin
playback at the new position.
The maximum delay allowed is 23:59:59;29. If a delay larger than the
maximum is entered, TimeDelay converts the entered value to less than the
maximum. For example, if you enter a value of 24:10:59;29 TimeDelay
converts it to 00:10:59;29. If you enter a value of 25:10:59;29 TimeDelay
converts it to 01:10:59;29.
Playback delays that are too small are automatically adjusted to the closest
valid value. The minimum playback delay is based on the video server that
the TimeDelay channels reside on; it is summarized in the following table.
You can modify the length of the K2 TimeDelay playback delay. The system
notifies you if you have exceeded the limit of the available disk space.
TimeDelay allows you to start recording on the assumption that you will
make sufficient room manually.
Changing K2 TimeDelay audio levels
You can modify the audio levels for the record channel or any one of the
playback channels independently. To open the Meters window, select the
TimeDelay channel and click on the Meters button in the lower right-hand
corner.
Video server Minimum playback delay (seconds)
K2 Summit Production Client with internal
storage or K2 Solo Media Server 15
K2 Summit Production with external storage 25