Grass Valley K2 ASI Media Client Installation - Manual (Page 12)

12 K2 ASI Media Client Installation and Service Manual August 14, 2008
Safety Summaries
Mechanical loading
Mounting of the equipment in the rack should be such that a hazardous
condition is not achieved due to uneven mechanical loading.
Reliable earthing (required for UL)
Reliable earthing of rack-mounted equipment should be maintained.
Particular attention should be given to supply connections other than direct
connections to the branch circuit (e.g. use of power strips).
Power disconnecting
Disconnect power before removing protective panel, soldering or replacing
components (these operations can be performed by qualified service
personnel only).
Injury Precautions
Do not operate without covers
To avoid electric shock or fire hazard, do not operate this equipment with
cover or blank panels removed.
Do not service alone
Do not perform internal service or adjustments of this product unless
another person capable of rendering first aid and resuscitation is present.
Do not operate in explosive atmosphere
To avoid injury or fire hazard, do not operate this product in an explosive
environment (atmosphere and materials).
Do not operate in wet/damp conditions
To avoid electric shock, this product should only be operated in dry
conditions.
Avoid exposed circuitry
Do not touch exposed connections and components when power is present.
Use care when servicing with power on
Dangerous voltages or currents may exist in this product. Disconnect power,
remove battery (if applicable), and disconnect test leads before removing
protective panels, soldering, or replacing components.
If the chassis has more than one power supply cord, disconnect all power
supply cords before servicing.