Grass Valley K2 ASI Media Client Installation - Manual (Page 11)

August 14, 2008 K2 ASI Media Client Installation and Service Manual 11
Safety Summaries
Please observe the following safety precautions to avoid injury and prevent
damage to this product or any products connected to it.
These servicing instructions are for use by qualified personnel only.
Safety Precautions
Avoid electric overload
Do not apply a mains voltage that is outside the range specified in this
manual.
Circuit overloading
Considerations should be given to the connection of the equipment to the
supply circuit and the effect that overloading of the circuits might have on
overcurrent protection and supply wiring. Appropriate consideration of
equipment nameplate ratings should be used when addressing this concern.
Reliable earthing (required for UL)
Ensure that your device is properly grounded before power-up. Grounding
is through the power cords.
Mains power and circuit overloading (required for UL)
The connection panel should comply with the legislation in force in the
country of installation.
Connection panel position in the rack must ensure that plugs and power
cords are within easy reach for switching off purposes.
Use proper power cord
Use only the power cord specified for this product and certified for the
country of use.
Rack mounting instructions (required for UL)
Elevated operating ambient
If installed in a closed or multi-unit rack assembly, the operating air ambient
temperature of the rack environment may be greater than room ambient.
Provide proper ventilation. Ventilation to keep the equipment in an
environment compatible with the maximum ambient temperature specified
by the manufacturer (see section Specifications).
Reduced air flow
Installation of the equipment in a rack should be such that the amount of air
flow required for safe operation of the equipment is not compromised.