Grass Valley iTX Master Control v.2.6 User Manual
Page 29
25
Master Control (ITX-MC)
User Guide
Setting and editing a master control primary event’s properties
Once a master control primary event is added to a schedule, you can set/edit the event’s
Transition settings by clicking the event’s transition symbol in the Schedule grid. The
Select transition window appears and allows you to set the transition’s duration, rate and
style.
Note:
If you intend on using Automation Assist mode to control the
schedule, ensure that the iTX channel’s event transition rate setting (slow,
medium, fast) is consistent with the iMC panel’s transition rate settings.
Similarly, you can edit the event’s duration value by clicking on the
Duration setting in the Schedule grid. The Change duration tool
appears and you can change the event’s current value.
Just like other iTX video events, selecting a master control primary event in the Schedule
Grid or Timeline displays a set of standard event properties in the Event Editor (see Figure 3-
2). These properties can be edited and applied to the scheduled event.
Fig. 3-2: Event Editor for a master control primary event.