Using the mixer mapper – Grass Valley iTX Master Control v.2.6 User Manual

Page 21

Master Control (ITX-MC)

User Guide

5 In the

Enabled Channels

section, identify the channel(s) that you want to be available

for panel control by dragging the channel from the

Available Channels

list and

dropping it onto the

Selected Channels

list.

When the

Channel List Display

property is set to

View Only

View and Edit

, the

channels listed in

Selected Channels

will be highlighted in the Mixer Mapper’s list.

Note:

Channels can be “selected” even if they do not have an Imagestore

750 configured. However, the Mixer Mapper only highlights channels
that have an Imagestore 750 configured and are control panel enabled.

6 Click

7 Exit the iTX Desktop’s Edit Mode by right-clicking in an empty portion of the Layout

selection bar and selecting the

Edit

command.

Using the Mixer Mapper

Once the Mixer Mapper is properly configured with iTX channels that are control panel
enabled, operators simply have to click the Mixer Mapper button to activate or de-activate
panel control on selected the iTX channel.

Whether it’s configured as a single button on its own or associated with a channel list, the
functionality and appearance of the Mixer Mapper button is identical.

Figure 2-4 demonstrates that the Mixer Mapper is active (green) so that when the iTXNTSC-
1 channel is selected in the iTX Desktop’s channel selector on the iMC panel, the iTX
Desktop becomes in sync with the iMC panel and the iMC panel’s Automation Assist
buttons can be used to manually control the channel’s active schedule.