Grass Valley iTX Master Control v.2.6 User Manual
Page 15
11
Master Control (ITX-MC)
User Guide
2 Right-click the
Hard Panel Controller
icon
and select the
Configuration
command.
The
Hard Panel Configuration
window appears.
3 Right-click the
Hard Panels
heading and select the
Add new Hard Panel
command. A
new panel heading (
New Panel1
) is added as a sub-heading.
4 Select the
New Panel
heading and then type a name for the panel in the
Panel Name
field. This name must be identical to the name given to the panel device when it was
configured using the MC Panel Configuration tool.
5 Click the
Select
button associated with the
Panel Driver
field, which opens the Select
Driver window.
6 Select
IMCPanel
from the Driver Name list and click OK.
7 The
IMC Panel Driver Configuration
section is added to the Hard Panel Configuration
pane and automatically fills in the
Local Address
(which is the IP address of the
computer hosting the iTX Desktop) and
TCP Listening Port
setting (5007).
8 Click
OK
to automatically save the hard panel’s configuration and close the Hard Panel
Configuration window.
Installing and adding the iTX MC layout to the iTX Desktop
A global layout is provided especially for iTX-MC use in the iTX Desktop’s Channel Control
view. The iTX MC layout contains all of the typical channel control components, plus the
Mixer Mapper
).
To install and add the iTX MC layout to the iTX Desktop’s Channel Control view:
1 Open the iTX Suite installer folder in Windows Explorer and navigate to:
ITX Install\Files\iTX Standard Layouts - v2.0
2 Run the
INSTALL TEMPLATES MANUALLY.bat
file to install the iTX MC global layout.
Open the iTX Desktop application.
3 From the same folder, run the
INSTALL INPUT Mappings.bat
file to install the default
input mappings for the iTX Desktop’s Mixer Mapper component.
4 Open the
Manage Views
dialog by right-clicking the
Layout Selection Bar
(bottom) and
select
Manage Views
.
5 Select the
User View
tab at the top of the
Manage Views
window. Then select the
Global
Layout
tab from the
Add Layout
from
Object Store
section. See