Grass Valley iTX Master Control v.2.6 - Manual (Page 24)

20
iTX-MC System Configuration
Configuring the iMC panel to support iTX Automation
Fig. 2-5: The MCS Panel Configuration Editor.
3 In General tab, ensure that the Panel Name setting is accurate and that Imagestore is
enable as the Master Control Type setting.
4 Select the Advanced tab and then select the Enable iTX Integration setting in the
Automation section. This causes the iTX Integration section to automatically appear.
S
5 In the iTX IP Address field, specify the IP address of the computer hosting the iTX Hard
Panel Controller and iTX Desktop client.
6 Select File>Write Config To Panel .
7 Click Yes when asked if you want to save the changes.
8 Click OK when the Config File Save window appears.
9 A window appears informing you that the device must be reset after a configuration
update. Click Yes to restart the device.