Grass Valley HSPARK - Manual (Page 36)

ENGLISH
HDSPARK/HDTHUNDER - Installation Manual 0
ENGLISH
Transfer between a USB key and another USB
key
1
Click the "USB to USB" tab on the "EDIUSLM" dialog.
2
Select the license to transfer and click [->].
3
Remove the USB key, set the USB key to transfer the
license to, and then click [Refresh].
Notes Make sure to remove the USB key where the license had
been stored, before setting the destination USB key.
When you change the USB keys, do not fail to click
[Refresh] in order to update the License list.
•
•
4
Select the license and click [<-] to transfer it to the
new USB key.
5
Wait until the license is transferred, and click [Close].
Notes Do not remove the USB key when the licenses are being
transferred.
To transfer licenses, make sure to replace USB keys step
by step.
•
•
Section 4 - License Transfer
HDSP-TH_Install_EN.indd 30 10/31/2008 12:44:07 PM