Grass Valley HSPARK - Manual (Page 26)

ENGLISH
HDSPARK/HDTHUNDER - Installation Manual 0
ENGLISH
Confirmation after installation
Confirming resource (in Windows Vista)
Confirm whether driver has been normally installed after restarting when
driver and application software installation is finished.
In the following procedures, operations for HDSPARK are explained as an
example.
1
Proceed to [System and Maintenance] from [Control
Panel] of [Start] menu.
Or right click [Computer] of [Start] menu and select
[Properties].
2
Click [Device Manager].
3
Double click [Sound, video and game controllers].
4
Confirm the device names.
[HSX-E1] (HDSPARK)
[HTX-E1] (HDTHUNDER)
If you find ! or X mark at the top of device name, that means you failed
installing HSX-E1 / HTX-E1 driver.
Try installation again, check rival resource, or change board insertion
position.
5
Close [Device Manager].
Checking the driver for the main board now finishes.
*
•
•
Section 3 - Software Installation / Uninstallation
[HTX-E1] is displayed for HDTHUNDER.
HDSP-TH_Install_EN.indd 20 10/31/2008 12:44:05 PM