Grass Valley HSPARK - Manual (Page 13)

ENGLISHENGLISH
HDSPARK/HDTHUNDER - Installation Manual
Hardware Setting
Setting the Main Board
Before board setting, be sure that your work area is dust-free and dry. Prepare
a Philips screwdriver and an empty box for removed screws in advance.
Also, be sure that your PC is turned off and that the cables (including power)
are removed from the PC.
* The product components vary depending on the product of your purchase.
POINT See the instruction manual for your PC (motherboard) for the
PCI (PCI Express) slot type.
The slot to set your HDSPARK/HDTHUNDER varies
depending on the product of your purchase.
See the instruction manual for your PC (motherboard) for the
PCI slot type.
- Set the main board (HSX-E1) in the PCI Express slot (PCI
Express x1).
- When PCI Express x1 is not available, either PCI Express
x4, x8 or x16 can be used.
- Set the main board (HTX-E1) in the PCI Express slot (PCI
Express x4).
- When PCI Express x4 is not available, either PCI Express
x8 or x16 can be used.
Section
2
HDSP-TH_Install_EN.indd 7 10/31/2008 12:44:01 PM