Grass Valley HSPARK - Manual (Page 17)

ENGLISHENGLISH
HDSPARK/HDTHUNDER - Installation Manual
Software Installation / Uninstallation
Installing EDIUS
This section explains how to install EDIUS both on Windows Vista and
Windows XP.
Notes When you start up PC after setting up the board, "Found
New Hardware"("Found New Hardware Wizard" in
Windows XP) appears. Select [Cancel] here.
Before starting installation, close all the other applications
that may be running in the task tray.
Installation requires the account authorized for the
administrator (such as PC administrator).
In order to install, you must log in as a user with
administrator privileges.
When you use the Video Out Plug-ins, install the product
which you want to use the plug-in for in advance.
Application to be installed may differ depending on model.
•
•
•
•
•
•
POINT To use GPUfx transition, the following conditions are
required.
- Direct3D 9.0c or later, PixelShader 3.0 or later
- SD 128 MB or larger required, 256 MB or larger
recommended
- HD 256 MB or larger required, 512 MB or larger
recommended
•
1
Set the product DVD into the DVD-ROM drive.
If the application does not start automatically, open the product DVD, and
double-click "SetupManagerForEDIUS.exe".
2
Click [Install].
"InstallShield Wizard" dialog box appears.
POINT When the other version of EDIUS has been installed,
uninstall it along to the screen instruction and restart PC.
•
Section
3
HDSP-TH_Install_EN.indd 11 10/31/2008 12:44:03 PM