Grass Valley EDIUS 5 - Manual (Page 40)

38
POINT For more information on how to start up EDIUS, see "Starting EDIUS"
"EDIUS User Guide / Reference Manual". •
POINT For EDIUS PCI-X/PCI-e, follow the procedures below and check the
driver for the Expansion board.
Referring to steps 1 and 2, open [Device Manager].
Double click the following items to check that the driver is installed.
- [IEEE 1394 Bus host controllers]
Device-[NEC OHCI Compliant IEEE 1394 Host Controller]
Close [Device Manager].
1
2
3
When resources compete
EDIUS will not operate normally if your and other devices compete or share PC
resources. Try following solution.
Remove other device that share interrupting or change IRQ of other device.
Change resource setting with BIOS of PC or motherboard. See instruction manual of
PC or motherboard since BIOS setting method varies by manufacturer.
POINT IRQ set method varies depending on PC or motherboard manufacturer.
Some types assign arbitrary IRQ to each PCI Express slot with BIOS,
other types program special IRQ in advance. •
Confirming resource (in Windows XP)
Confirm whether driver has been normally installed after restarting when driver and
application software installation is finished.
1
Proceed to [Performance and maintenance] from [Control
panel] of [start] menu and select [See basic information
about your computer].
Or right click [My Computer] of [start] menu and select
[Properties].
•
•