Grass Valley EDIUS 5 - Manual (Page 20)

1
Setting the NX Bay (NHX-B10) (Optional)
For EDIUS NX PCI-X / PCI-e / Express
Before setting the Bay, be sure that your work area is dust-free and dry. Prepare a
phillips screwdriver, a slotted screwdriver and an empty box for removed screws in
advance.
Also, be sure that your PC is turned off and that the cables (including power) are
removed from the PC.
1
Connect the attached DV cable to the NX Bay. Also check
the connection of internal connection cables.
DV cable
Internal connection cable
2
Set the NX Bay in PC.
►