Grass Valley EDIUS 5 - Manual (Page 26)

2
Hardware MPEG Engine board Rear panel (Optional)
［1］ ［2］
[1] DV terminal (IEEE1394 6pin)
In case that the main board and the Hardware MPEG Engine board are connected
internally with a DV cable, please do not input DV / HDV signal via the DV terminal
(IEEE1394 6pin) on the Hardware MPEG Engine board. Use the DV terminal (DV
4pin) on the main board.
[2] HD / SD component output terminal (BNC)
* These terminals do not exist on some board.
Notes In EDIUS 5, Hardware MPEG encoding for the output is not
supported.
•
NX Bay (NHX-B10) Front panel (Optional)
[1]
[5]
[2] [3] [4]
[6] [7] [8] [9] [11] [12] [13] [10]
[1] DV indicator
Lights in DV input / output.
[2] INPUT S-VIDEO indicator
Lights in S-video input.
[3] INPUT VIDEO indicator
Lights in composite video input.
[4] INPUT AUDIO indicator
Lights in analog audio input.
[5] DV terminal
[6] INPUT S-VIDEO (S-Video input) terminal
[7] INPUT VIDEO (composite video input) terminal