Part names, Expansion board (hx-hd1) rear panel – Grass Valley EDIUS 5 User Manual

Page 24

Part names

EDIUS NX PCI-X / PCI-e / Express

Main board (NHX-E1 / E2) Rear panel

［1］［2］［3］

［4］

［5］

[1] Analog audio input terminal (stereo mini-jack)
[2] Analog audio output terminal (stereo mini-jack)
[3] Analog video input terminal (mini-DIN7pin)

You can directly connect the S-video cable. Use the analog video terminal conversion
cable in the package to connect the pin-jack (composite).

[4] Analog video output terminal (mini-DIN7pin)

You can directly connect the S-video cable. Use the analog video terminal conversion
cable in the package to connect the pin-jack (composite).

[5] DV terminal (DV4pin)

In case that the main board and the Hardware MPEG Engine board are connected
internally with a DV cable, please do not input DV / HDV signal via the DV terminal
(IEEE1394 6pin) on the Hardware MPEG Engine board. Use the DV terminal (DV
4pin) on the main board.

Expansion board (HX-HD1) Rear panel

[1]

[2]

[1] Unbalanced audio 2ch output terminal (pin-jack)

This can be simultaneously used with analog audio output of main board.

[2] HD / SD component output terminal (BNC)