Electrolux EKC5045 - Manual (Page 31)

electrolux care and cleaning
31
5. Clean the outer and inner glass using
hot soapy water or hob cleaner may
be used. Do not use hob cleaner on
the Stainless Steel or painted finishes.
Do not try to clean the foil which is
inside the door. The foil is there to
help keep the door cool, if it is
damaged it will not work. Ensure
that all parts are well rinsed and
thoroughly dried before attempting to
replace the outer door.
If the door glass panel becomes
chipped or has deep scratches the
glass will be weakened and must
be replaced to prevent the
possibility of the panel shattering.
Please contact your local Service
Force Centre who will be pleased
to advise further.
To replace the outer door glass
1. Holding the oven glass with both
hands, gently place the locators into
the holes of the brackets at the
bottom of the oven door.
2. Push the top of the oven glass
towards the oven door; ensuring the
screw location holes line up.
3. Hold the glass in place with one
hand and insert the crosshead
screws into the location holes with
the other hand. Give the screws one
turn to ensure the glass is secure.
4. Tighten the screws positively with a
Pozidrive screwdriver before closing
the oven door.
Do not attempt to use the oven
without the glass being in place.
To clean the inner glass door
panels
Clean the inner glass door panels using
a soft cloth and hot water to which a
little washing up liquid has been added.
If the inner panel is heavily soiled, Hob
Brite may be used. Do not use
abrasive cleaning materials on the door
glass. Ensure that all parts are well
rinsed and thoroughly dried before
attempting to replace the glass.