Electrolux, Cleaning the grill and oven furniture, Cleaning inside the grill and oven compartments – Electrolux EKC5045 User Manual
Page 29
![background image](/manuals/79598/29/background.png)
electrolux
care and cleaning
29
• Avoid the use of:
• Household detergents and
bleaches.
• Impregnated plastic or nylon
pads that are not described as
suitable for non-stick
saucepans.
• Abrasive cleaning pads,
scourers and steel wool pads.
• Chemical oven cleaners, e.g.
aerosols and oven pads.
• Rust stain, bath and sink stain
removers.
• Any of the above products may
cause damage to the hob.
• It is dangerous to mix different
cleaning products. The chemicals
in them may react with each other
with hazardous results.
• Sugar solutions must be removed
from the hob before the syrup has
set otherwise damage to the hob
surface will occur.
• Avoid placing plastic items, foil or
dishes on the hot surface as this
will cause damage to the hob
Cleaning the grill and oven
furniture
All removable parts, except the grill pan
handle can be washed in the
dishwasher.
The grill pan, grill pan grid and oven
shelves may be cleaned using a soap
impregnated steel wool pad. Soaking
first in hot soapy water will make
cleaning easier.
Cleaning inside the grill and oven
compartments
The sides and back of the grill/second
oven and main oven compartments are
coated with a special Stay-clean
coating. They should not be cleaned
manually.
The vitreous enamel main oven base
and grill compartment base can be
cleaned using normal oven cleaners
with care. Ensure that the
manufacturers instructions are followed
and that all parts are well rinsed
afterwards.
Aerosol cleaners must not come
into contact with elements, the
door seal, or any painted finishes
as this may cause damage.
Aerosol cleaners must not be
used on Stay-clean surfaces.
•
To carry out the cleaning cycle,
remove the oven shelves and set the
oven to 220°C.
•
It is a good idea to run the oven for
an hour or two per week to ensure
continued good performance from
the Stay-clean finish.
•
Slight discolouration and polishing of
the Stay-clean surfaces may occur in
time. This
does not
affect the Stay-
clean properties in any way.