Grass Valley K2 Edge Installation v.4.1.0 - Manual (Page 23)

K2 Edge Installation and Service Manual - document version: 4.1 – Page 23
11.6 Configuring the IP Manager
After power on and startup, first configure the IP Manager via the K2 Edge's LCD-panel:
 Go to Network configuration > IP-manager.
 Specify:

Use DHCP: On/Off

IP-address: note that the IP Manager has its own IP-address.

Netmask

Gateway

Nameserver
 Select Set/OK to save changes.
You can now access the IP Manager via a web browser.
11.7 Configuring the K2 Edge hostname and network settings
Once you configured the IP Manager web interface, you can continue configuration of the K2 Edge via
the IP Manager web interface: enter the IP Manager's IP-address in a web browser and log in with
your IP Manager credentials.
To specify a hostname:
 Go to Network configuration > Hostname
 Specify the K2 Edge hostname.
 Click Set to save changes.
To configure the K2 Edge ’s network settings:
 Go to Network configuration > K2Edge.
 Specify network settings for the K2 Edge server.

Default port 0 is used:
 Method: Auto, using DHCP/Manual or Manual
 IP-Address
 Netmask
 The system’s MAC address is displayed.
 Gateway
 Nameserver
 Click Set to save changes.
11.8 Specifying the TX/MAM database IP-address
Specify the TX/MAM servers’ virtual IP-address:
 Go to Network configuration > TX/MAM server virtual IP.
 Click Set to save changes.