Grass Valley EDIUS XRE v.7.31 - Manual (Page 35)

EDIUS XRE ― User Guide 35
Configuring XRE Client
For more information about the plug-in settings, see the EDIUS
Reference Manual.
Note • It is necessary that the plug-in environments on the
EDIUS edit terminals and the controller/engine are all
identical. If their plug-in environments are different,
an error may occur or your data may not be exported
properly.
2 Click the ”Plug-in setting” tree, and then click an item to set.
3 Set each item, and then click [OK].
You can continue to configure other settings by clicking [Apply].
Configuring the client
Configuring XRE Monitor (client mode)
On the EDIUS edit terminal to be used as an client, configure the
connection settings to the controller.
The settings are also required when you are using only XRE Monitor
on a PC where EDIUS is not installed.
Note • The destination controller must be started beforehand.
Configuring the controller ►P26
1 Double-click the XRE Monitor icon on the desktop.
Alternative
• Click the "start" menu, and then click "All Programs"->"Grass
Valley"-> "XREMonitor".
2 Click [Settings].