Grass Valley EDIUS XRE v.7.31 - Manual (Page 19)

EDIUS XRE ― User Guide 19
EDIUS XRE Overview
You can also check the status of rendering jobs in XRE Monitor. If it is
started on the controller, XRE Monitor (management mode) is enabled,
which allows you to sort the order to perform rendering jobs.
System configuration example
The following figure shows an example where four clients are
connected to a single controller/engine to perform rendering processes.
The section 4 describes how to set up EDIUS XRE based on a following
system configuration example.
EDIUS XRE Settings
►P25
Client
Storage
Fibre Channel Switch Gigabit Ethernet Switch
Controller/Engine
Server
Fibre Channel
Gigabit Ethernet
Client
Client Client Client
PRODUCTION SERVER K2 SUMMIT 3G
K2 SAS STORAGE
K2 SAS STORAGE
K2 SAS STORAGE
K2 MEDIA SERVER
Note • In v 7.31 or later, EDIUS XRE supports the service of
Windows. If you use all functions of EDIUS XRE, you
need log on a user with Administrator.
• EDIUS XRE needs same version of EDIUS which is on the
client. In different version of EDIUS, EDIUS XRE will not
finish rendering correctly.
• If you need to connect with GV STRATUS, EDIUS XRE
require the option license.