Grass Valley EDIUS XRE v.7.31 - Manual (Page 27)

EDIUS XRE ― User Guide 27
Configuring XRE Management Server
2 Double-click on the XREController icon.
The "XREController setting" dialog box appears.
™ "XREController setting" dialog box
Project folder
Click [Select...] to specify the location where
rendering job information is saved.
Port
Enter a port number. The default setting value
is 1223.
Days to keep jobs in
history
Set the number of days to keep the history of
rendering jobs. The default setting value is 30
days.
Service Open the service setting dialog on Windows
Note
• You must specify a port number that is not blocked by
the firewall. The firewall is turned off with the standard
settings of a base PC.
• For a system whose firewall is turned on for operations,
the firewall setting must be changed to unblock the
desired port number.
• The system may not work properly if you specify a port
number used by other programs. Therefore, you must
specify an unused port number.
3 Select the project folder, and then click [OK].
POINT • Setting the read-only and system attributes to the specified
project folder can prevent accidents such as erroneous
deletion of the project folder by users. Use the Attrib
command at the command prompt to change the folder
attribute.
Note • The project folder must be specified as a folder that can
be referenced from any controller/engine/client PCs and
whose address display is always the same in Explorer.