Grass Valley EDIUS XRE v.7.31 - Manual (Page 26)

26 EDIUS XRE ― User Guide
Section 4 ― EDIUS XRE Settings
Client PC
¾ XRE Monitor settings (common settings for all clients)
Server setting
Name
XREServer1 (any name)
Address
"XREServer1" (computer name of the base PC where
controller/engine is installed) or "172.25.90.161"
Port
1223 (default)
Configuring the controller
Configuring XREController
Configure settings including the location of the "project folder" where
rendering job information is saved and port on the PC to be used for
EDIUS XRE system.
1 Click the "start" menu, and then click "All Programs"->"Grass
Valley"-> "XREAdminConsole".
™ “XREAdminConsole” dialog box
XRE Controller Set the project folder.
Note
• GVRenderEngine and Plug-in are the configuration of the
engine. If you have installed both the controller and the
engine on a PC, you are able to select GVRenderEngine
and Plug-ins on the XREAdminConsole.
Configuring the engine
►P31