Grass Valley EDIUS XRE v.7.31 - Manual (Page 29)

EDIUS XRE ― User Guide 29
Configuring XRE Management Server
™ "Server setting" dialog box
Name Type the name of the controller.
Address
Enter the computer name or IP address of the PC you
want to use as an controller.
Port Enter a port number. The default setting value is 1223.
Note • You must specify a port number that is not blocked by
the firewall. The firewall is turned off with the standard
settings of a base PC.
• For a system whose firewall is turned on for operations,
the firewall setting must be changed to unblock the
desired port number.
• The system may not work properly if you specify a port
number used by other programs. Therefore, you must
specify an unused port number.
5 Set each item, and then click [OK].
6 Click [Apply].