Grass Valley 8950DAC - Manual (Page 14)

14 8950DAC Instruction Manual
Configuration
Configuration
The 8950DAC can be configured locally using onboard switches or
remotely using the 8900NET network interface GUI or a networked control
panel.
Refer to the following sections for configuration instructions:
• Configuration Summary ( page 14 )
• Local On-board Module Configuration ( page 19 )
• Remote Control and Monitoring ( page 22 )
Operation of these control types is explained in detail in their respective
sections of this manual.
Configuration Summary
This section provides a summary of all parameters that can be configured
on the 8950DAC module.
Table 5 on page 17 provides a summary in table
format of all parameters and their ranges, default values, and remote, local,
and control panel function names and locations for setting each value.
Format Selections
The 8950DAC converts a SMPTE 259M (270 Mb/s) D1 serial component
digital signal to any one of the following analog Color Difference or GBR
video signals:
• SMPTE
• GBR
• Beta (US/525)
• Beta (Japan/525)
• MII (US/525)
• MII (Japan/525)
• EBU N10 (625)
Once a format is selected, the default values for that format will be loaded
to the module. The overall factory default for the module is GBR.