Software updating – Grass Valley 8925DMB-B User Manual
Page 43
8925DMB-B and -U — Instruction Manual
43
Software Updating
Frame Health Reporting
This web page allows configuration of the alarms and warnings that are
reported to the external Frame Health Alarm connector on the rear of the
GeckoFlex frame. Refer to 8900NET Instruction Manual for more details.
LED Reports Link
Select the LED Reports link to open the 8900NET LED Reporting web page.
Normally, every module in the frame will report to the 8900NET module
any Fault, Signal Loss, Reference Loss, or Config Error conditions. These
conditions will be reflected by the status LEDs on the 8900NET module.
Using this web page, any of these conditions can be disabled from being
reported to the 8900NET module for each individual module and other
components (power supplies, fans) in the frame
SNMP Trap Reports Link
Select the SNMP Trap Reports link to open the 8900NET SNMP Reporting
web page. This link will only be present when SNMP Agent software has
been installed on the 8900NET module. This web page allows configura-
tion of which alarms and warnings that are reported to the SNMP manage-
ment software.
Refer to the 8900NET Instruction Manual for complete details on using the
8900NET web pages.
Software Updating
Software updating of the 8925DMB-B and 8925DMB-U modules is done
using the NetConfig Networking Application PC option. This application
is available free of charge from the Grass Valley web site.
The procedure for updating software with NetConfig is given in the
8925DMB-B and 8925DMB-U Release Notes when software updates
become available. Check the Grass Valley web site for update information.
Refer to
Contacting Grass Valley on page 4
for more information.
All modular product documentation can be found in PDF format on the
Grass Valley web site at this link: