Grass Valley 8920DAC - Manual (Page 10)

4 8920DAC Instruction Manual
8920DAC AES/EBU to Analog Audio Converter
Cabling
Note At the back of this manual are overlay cards that can be placed over the rear
connector BNCs to identify the specific 8920DAC connector functions.
Loop-through Input
Connect an input signal to one of the loop-through input connectors, J9 or
J10 (see
Figure 3 ). The 8920DAC input will accept AES-3id/EBU audio. Ter-
minate the unused connector into 75
Ω
if the signal is not looped to other
equipment.
Figure 3. 8920DAC Input/Output Connectors
Outputs
The 8920DAC provides one stereo analog, differential pair output through
the plug-in adapter connected to BNCs J1- J4.
J2
J4
J6
J8
J9 J10
IN
Not Used
DAx
O
U
T
J3
J5
J7
J2
J6
J8
0614-02
AES/EBU
Loopthrough Input
Analog balanced
output adapter J1
J4
R+
GND
R–
L+
GND
L–
Grass Valley
Adaptor