Grass Valley 3DX-3901 - Manual (Page 16)

GUIDE TO INSTALLATION AND OPERATION
12 | 3DX-3901
• SENSIO ® 3D – Input signal is composed of 2 images encoded using the SENSIO ® 3D algorithm with one
image on the left and one image on the right.
• Over – Under – Input signal is composed of 2 images, one on the top half of the signal and one on the bottom
half of the signal. This format is only available for progressive inputs.
When the Input Format is Dual Link HD, the display format is Full by default.
Main Output Select section
Output Format: Use the pulldown to select from among these options:
• Single Link HD
• Dual
Link HD
• 3Gbps Lvl B - DS
Display Format: This pulldown is only active when the Output Format is Single Link HD. Use the pulldown to select
from among these options:
• Full – Output signal has no encoding.
• Normal Side by Side – Output signal is encoded side-by-side with incoming left and right signals.
• SENSIO
® 3D – Output signal is encoded side-by-side, using the SENSIO ® 3D algorithm, with incoming left
and right signals.
• Over – Under – Output signal is encoded over-under with incoming left and right signals. This format is only
available for progressive outputs.
When the Output Format is Dual Link HD, the display format is Full by default.
Aux Output Select section
Output Format: The output format always follows the input format. In the future, it will be possible to change the
output format of the auxiliary output.
Display Format: Use the pulldown to select from among these options:
• Normal Side by Side – Aux Output signal is encoded side-by-side with incoming left and right signals.
• SENSIO
® 3D – Aux Output signal is encoded side-by-side, using the SENSIO ® 3D algorithm, with incoming
left and right signals.
• Anaglyph (color) – Aux output is an Anaglyph representation of the incoming left and right signals.
• Disparity (L-R) – Left minus right – Aux Output signal is the difference between incoming left and right
signals.
• Left – Aux Output signal is fed with input left signal.
• Right – Aux Output signal is fed with input right signal.
• Over – Under – Aux Output signal is encoded over-under with incoming left and right signals. This format is
only available for progressive outputs.
• 3Gbps Lvl B - DS
Swap Eyes
Click the checkbox to interchange the two eye signals – left becomes right and right becomes left. This is done at
the card input and it precedes any other processing. If the input is Side by Side on a single link, the eyes will be
swapped.