H3C Technologies H3C SecBlade FW Cards - Manual (Page 6)

5
Figure 5 Network diagram
Configuration procedure
By default, the system has created the Trust, DMZ and Untrust zones, and you only need to deploy them.
1. Deploy the Trust zone:
Add interface Ten-GigabitEthernet 0/0.1 to the Trust zone.
a. Select Device Management > Zone in the navigation tree.
b. Click the icon of the Trust zone.
c. Select Ten-GigabitEthernet 0/0.1.
d. Click Apply.
2. Deploy the DMZ zone:
Add interface Ten-GigabitEthernet 0/0.2 to the DMZ zone.
a. Select Device Management > Zone in the navigation tree.
b. Click the icon of the DMZ zone.
c. Select Ten-GigabitEthernet 0/0.2.
d. Click Apply.
3. Deploy the Untrust zone:
Add interface Ten-GigabitEthernet 0/0.3 to the Untrust zone.
a. Select Device Management > Zone in the navigation tree.
b. Click the icon of the Untrust zone.
c. Select Ten-GigabitEthernet 0/0.3.
d. Click Apply.