H3C Technologies H3C WA2110-AG Wireless LAN Access Point - Manual (Page 8)

2
Table 2 Descriptions of power source
Power
Source
Connection Details Ordering information
AC / DC
Power
Adapter
The WA2110-AG access point can
accept power from an AC / DC
power adapter. Input specification is
as follows:
+48V , 0.52A min.
Connect the adapter’s power jack to
the WA2110-AG power interface
Figure 1 (3)
If you need an AC / DC
power adapter for your
WA2110-AG access
point, you must use the
FSP025-1AD207A
adapter (part number
0231A0EQ)which is
available from H3C /
3Com.
Power over
Ethernet (PoE,
IEEE 802.3af
standard)
power source
The WA2110-AG access point can
accept power from a PoE power
source.
No DC power adapter is required.
Connect the PoE cable directly to the
10/100 Base-TX Ethernet connector
Figure 1 (4)
Please see the H3C /
3Com product
catalogues for a range of
802.3af compatible
power sources.