H3C Technologies H3C WA2110-AG Wireless LAN Access Point - Manual (Page 12)

6
Table 3 Meanings of the LEDs
LED Meaning
POWER
Indicates the working status of the power supply:
On: The device is working properly.
Off: The device is not powered on or is faulty.
11a
Indicates the status of the wireless link when the device works in the
11a mode:
Off: The wireless link is not initialized or is faulty.
Blinking slowly: A small amount of data is being transmitted or
received through the wireless link.
Blinking quickly: A large amount of data is being transmitted or
received through the wireless link.
11b/g
Indicates the status of the wireless link when the device works in the
11b/g mode:
Off: The wireless link is not initialized or is faulty.
Blinking slowly: A small amount of data is being transmitted or
received through the wireless link.
Blinking quickly: A large amount of data is being transmitted or
received through the wireless link.
LINK
Indicates the working status of the Ethernet port:
On: A link is present.
Off: No link is present.
Blinking: Data is being transmitted or received through the Ethernet
port.
Installation Procedure
This section covers the following contents:
•
Preparing installation tools
•
Checking the device before installation
•
Attaching the antennas
•
Mounting the access point