H3C Technologies H3C WX3000E Series Wireless Switches - Manual (Page 13)

6
Step Command
2. Enable the ACSEI server function. acsei server enable
3. Enter ACSEI server view. acsei server
4. Close the specified ACSEI client. acsei client close client-id
Restarting an ACSEI client
Step Command
1. Enter system view. system-view
2. Enable the ACSEI server function. acsei server enable
3. Enter ACSEI server view. acsei server
4. Restart the specified ACSEI client. acsei client reboot client-id
Displaying ACFP client information on the server side
Task Command Remarks
Display ACSEI client summary.
display acsei client summary [ client-id ] [ |
{ begin | exclude | include }
regular-expression ]
Available in any view
Display ACSEI client information.
display acsei client info [ client-id ] [ | { begin
| exclude | include } regular-expression ]
Available in any view
Configuring ACSEI client
As a function supported by the device, ACSEI client is integrated into the software system (Comware) of
the device.
Enabling ACSEI client
Step Command Remarks
1. Enter system view. system-view N/A
2. Enter interface view.
interface interface-type
interface-number
N/A
3. Enable ACSEI client. acsei-client enable Disabled by default.
NOTE:
The Comware platform can run only one ACSEI client, and ACSEI client can be enabled on only one
interface at a time.