H3C Technologies H3C MSR 800 - Manual (Page 21)

14
Figure 14 Grounding the router to a grounding strip
Grounding the router to a buried grounding conductor
If the installation site has no grounding strips but offers the option of grounding to earth, hammer a
0.5 m (1.64 ft) or longer angle iron or steel tube into the earth to serve as a grounding conductor, as
shown in Figure 15 .
Figure 15 Grounding to a conductor buried in the earth
Installing a WLAN antenna
Only the MSR800-W and MSR800-10-W support the WLAN antenna.
To install a WLAN antenna:
1. Change the angle of the antenna orientation from vertical to horizontal.
2. Attach the antenna to the antenna port on the router. Avoid over-tightening.
Change the antenna orientation to vertical to achieve better signal coverage.