H3C Technologies H3C MSR 800 - Manual (Page 20)

13
Figure 13 Connecting the grounding cable to the rack
Grounding the router to a grounding strip
1. Remove the grounding screw from the router chassis.
2. Put the ring terminal of the grounding cable on the grounding screw.
3. Use a screwdriver to fasten the grounding screw.
4. Remove the nut from the post on the grounding strip.
5. Use the needle-nose pliers to bend the bare wire at the other end of the grounding cable.
6. Hook the grounding cable to the post on the grounding strip, and secure the nut.