H3C Technologies H3C MSR 50 - Manual (Page 14)

7
An IPX router supports up to 10,240 service information items, 2,048 service types, and 5,120 static
service information items (including all service types). You can configure the maximum service
information items for a certain type of service.
If the route associated with a static service information item is invalid or deleted, the static service
information item will be prevented from broadcast, until the router finds a new valid route associated with
service information.
The maximum queue length of the same service type items does not limit the amount of static service
information but the amount of dynamic service information. If the newly configured queue length is less
than the original length, the table items in the service information table will not be deleted; if the amount
of service information for the same service type reaches the configured value, new service information
items will not be added.
To configure IPX service information:
Step Command Remark
29. Enter system view. system-view N/A
30. Add an IPX static service information
item.
ipx service service-type server-name
network.node socket hop hopcount
[ preference preference ]
N/A
31. Configure the maximum queue
length of the same service type
items.
ipx sap max-reserve-servers length
Optional.
2048 by default.
The following table gives values of some service types:
Service type Value
Unknown 0000h
Print Queue 0003h
File Server 0004h
Job Server 0005h
Print Server 0007h
Archive Server 0009h
Remote Bridge Server 0024h
Advertising Print Server 0047h
Reserved Up To 8000h
Wildcard FFFFh (-1)
Configuring the IPX forwarding feature
Configuration prerequisites
Configure basic IPX.