H3C Technologies H3C SR8800 - Manual (Page 56)

49
To create POS channels, configure the concatenated mode. On a 2.5 Gbps E-CPOS interface in
concatenated mode, you can create sixteen 155 Mbps channels, four 622 Mbps channels, or one 2.5
Gbps POS channel.
1. Configure the operating mode of a 2.5 Gbps E-CPOS interface
To create a 2.5 Gbps POS channel and configure its operating mode on a 2.5 Gbps E-CPOS
interface:
Step Command Remarks
1. Enter system view. system-view N/A
2. Enter E-CPOS interface view. controller e-cpos interface-number N/A
3. Configure the 2.5 Gbps
E-CPOS interface to operate
in concatenated mode.
using oc-48c
The default is the channelized
mode.
2. Create a 622 Mbps POS channel and configure its operating mode
To create a 622 Mbps POS channel and configure its operating mode on a 2.5 Gbps E-CPOS
interface:
Step Command Remarks
1. Enter system view. system-view N/A
2. Enter E-CPOS interface view. controller e-cpos interface-number N/A
3. Configure the 2.5 Gbps
E-CPOS interface to operate
in channelized mode.
using oc-48
Optional.
By default, a 2.5 Gbps E-CPOS
interface operates in channelized
mode.
Before creating a 622 Mbps POS
channel, you must configure the
2.5 Gbps E-CPOS interface to
operate in channelized mode.
4. Create a 622 Mbps channel
and enter its view.
oc-12 oc-12-number N/A
5. Configure the 622 Mbps
channel to operate in
concatenated mode.
using oc-12c
The default is the channelized
mode.
3. Create a 155 Mbps POS channel and configure its operating mode
To create a 155 Mbps POS channel and configure its operating mode on a 2.5 Gbps E-CPOS
interface:
Step Command Remarks
1. Enter system view. system-view N/A
2. Enter E-CPOS interface view.
controller e-cpos
interface-number
N/A
3. Create a 622 Mbps channel
and enter its view.
oc-12 oc-12-number N/A